Mako® Hotend for Bambu Lab Tips and Tricks

• Related Articles

• Mako™ for Bambu Lab Upgrade Kit Installation Instructions

  How to Install the Mako™ for Bambu Lab Upgrade Kit Compatibility Bambu Lab P1P Bambu Lab P1S Bambu Lab X1 Bambu Lab X1C Bambu Lab X1E What You Need 2 mm Hex Key Mako For Bambu Lab Mako Hotend Mako Silicone Boot FIN Nozzle Heater Thermistor Heater ...

• Mako™ Hotend for Bambu Lab Printing Tips

  To help you get the most out of your upgrade, we’ve put together some helpful resources and tips below. Installation & Setup Mako™ for Bambu Lab Upgrade Kit Installation Instructions Mako™ Hotend Clogging with Low-Temperature Filaments If you haven’t ...

• Mako™ Hotend Clogging with Low-Temperature Filaments

  Some users may experience clogs when printing with PLA or other filaments with low melting temperatures. This can occur if heat rises within the hotend & causes the filament to soften too early, leading to blockages in the hotend/nozzle. ...

• Importing Mako® Hotend Custom Material Profiles

  For optimal printing performance, import our custom material profiles for the Mako Hotend using the instructions below: Download the Custom Material Profiles from the Downloads section on our Mako Hotend Product Page Extract all of the .bbscfg files ...

• I'm experiencing stringing with my hotend. What should I do?

  Are you experiencing stringing with your Mosquito, Mosquito Magnum or Copperhead hotend? There are multiple things that could cause excessive stringing. Several things to check first are: 1. Is your filament dry? Many filaments are highly ...