Importing Mako® Hotend Custom Material Profiles

Importing Mako® Hotend Custom Material Profiles

For optimal printing performance, import our custom material profiles for the Mako Hotend using the instructions below:
  1. Download the Custom Material Profiles from the Downloads section on our Mako Hotend Product Page
  2. Extract all of the .bbscfg files from this folder
  3. Open Bambu Studio
  4. Click File at the top left of the screen
  5. Hover your mouse over Import and select Import Configs
  6. Choose the .bbscfg files downloaded from the website 
  7. Make sure to select from the Mako optimized materials and processes when printing





Note: If you'd prefer, you can still use the Bambu stock process settings as long as you select the Mako material profiles. For faster print speeds and optimal printing performance, the Mako process settings should be used.



    • Related Articles

    • Mako™ for Bambu Lab Upgrade Kit Installation Instructions

      How to Install the Mako™ for Bambu Lab Upgrade Kit Compatibility Bambu Lab P1P Bambu Lab P1S Bambu Lab X1 Bambu Lab X1C Bambu Lab X1E What You Need 2 mm Hex Key Mako For Bambu Lab Mako Hotend Mako Silicone Boot FIN Nozzle Heater Thermistor Heater ...

    • Mako™ Hotend for Bambu Lab Printing Tips

      To help you get the most out of your upgrade, we’ve put together some helpful resources and tips below. Installation & Setup Mako™ for Bambu Lab Upgrade Kit Installation Instructions Mako™ Hotend Clogging with Low-Temperature Filaments If you haven’t ...

    • Mako™ Hotend Clogging with Low-Temperature Filaments

      Some users may experience clogs when printing with PLA or other filaments with low melting temperatures. This can occur if heat rises within the hotend & causes the filament to soften too early, leading to blockages in the hotend/nozzle. ...

    • I'm experiencing stringing with my hotend. What should I do?

      Are you experiencing stringing with your Mosquito, Mosquito Magnum or Copperhead hotend? There are multiple things that could cause excessive stringing. Several things to check first are: 1. Is your filament dry? Many filaments are highly ...

    • Will I lose any functionality switching to a Mosquito Hotend?

      Not at all! But you will gain functionality in the One-Handed Nozzle Change™ and the long-term durability of the Mosquito Hotend.