Mako®
Getting Started with the Mako 65W Hotend for Bambu
Getting Started with the Mako 65W Hotend for Bambu Thank you for purchasing a 65W Mako Hotend or electronics upgrade! Below is a collection of links to articles to get you up and running with the 65W Mako! If you have any issues with installation or ...
Nozzle Swapping Guide for the Mako® Hotend for Bambu Lab
Compatibility Bambu Lab P1P Bambu Lab P1S Bambu Lab X1 Bambu Lab X1C Bambu Lab X1E What You Need FIN Nozzle Nozzle Torque Wrench™: 1.5 Nm or 6mm (1/4 in) wrench/socket wrench Optional Wire brush Tweezers, needle-nose pliers, pencil Plastic Repellent ...
Mako® 65W Hotend for Bambu Lab Upgrade Kit Installation Instructions
How to Install the Mako® Hotend for Bambu Lab Upgrade Kit Compatibility Bambu Lab P1P Bambu Lab P1S Bambu Lab X1 Bambu Lab X1C Bambu Lab X1E What You Need 2 mm Hex Key Mako Hotend For Bambu Lab Mako Hotend Mako Silicone Boot FIN Nozzle Heater & ...
Avoiding Clogs on the Mako® Hotend with Low-Temperature Filaments
Due to the Mako's extended melt-zone and high flow-rate capability, some users may experience clogs when printing with PLA or other filaments with low melting temperatures if certain precautions are not taken. Clogs can occur if heat rises within the ...