Adding a Photo of my Current Print...
Hello, I am not quite to the point where I am using the Copperhead Hotend yet w/ all the fixings, i.e. heater core and thermistor. But... I wanted to post something from my gigantic printer I fastened together from an old PrintrBot 1403. So, w/out further
Copperhead Heatbreak Drop-in for Ender 3 and Ender 6 Printer
Hello Everyone, I dropped a copperhead heatbreak in my ender 3 and 6, * Running everything Stock except for the heatbreak, I did not experience this prior to upgrade * Filament is PLA+ from eSun * Settings was all the same before upgrade, except for retraction
Using Copperhead Heatbreak with Prusa I3 MK3S heat sink and hot block
Hi there, I purchased a Copperhead Threaded Reprap 1.75 (compatible with the MK3S) heat break. When installing it with the Prusa e3d V6 hot block and nozzle i noticed that the hot end of the heat break is longer than the e3d heat break by about 1.5 mm and pokes out of the hot block. Is this okay? Thank you! Jesse Riley
Oops and I just Realized what the Top Part was For Currently?
Hello, I just ordered a Copperhead. The issue now is that I removed the PTFE insert holder... Does your company sell more of these items or can you direct me where to purchase them? Seth
Older Model Printers/PrintrBot 1403 Simple Metal and Copperhead
Hello, I am fitting new ideas to an older model printer. I have a PrintrBot 1403 Simple Metal. I am mechanically changing it slowly and adding in more options for larger builds. I had come across this company, Slice Engineering, b/c I wanted a few parts
Stringing with Prusa Mini w/ BondTech extruder and Copperhead hot end
I went all in with the upgrades for my Mini. I can print filaments now that I couldn't print before. The print quality is over the top. Mini has never printed this well before. However... I have bad stringing that that won't go away. The stringing is
Air Gap in Heatsink
Hello folks, This is a long winded way to ask what is probably a simple question with a simple answer. The context: I recently purchased the Copperhead as an upgrade for the Anycubic Vyper. The Vyper's stock hotend has the sort of design where the bowden