A RepRap style nozzle is characterized by its M6x1.0 threads, 7 mm threaded length, and 12.5 mm overall length. Such nozzles include those from E3D, Olsson, P3D, and Slice Engineering. Please refer to the Vanadium™ Nozzle product page drawings and ...
We recommend cleaning the Vanadium™ Nozzles and Mosquito® or Copperhead® Hot Blocks by either heating them up on your 3D printer or with a heat gun, then wiping off the plastic residue with a cotton swab. You can also bake off the residue in an oven ...
The Mosquito®, Mosquito® Magnum, and Copperhead® Hotends all use the same nozzles - Rep Rap style with an M6x1.0 thread. Please refer to the Vanadium Nozzle product page drawings and STEP files.
With the purchase of each GammaMaster Nozzle, the buyer is entitled to a Limited Lifetime Warranty against abrasive wear with widely commercially available filaments such as glass and carbon fiber filled. This warranty is non-transferable and extends ...