White Papers/Case Studies

• Related Articles

• Desiccant Activation Testing White Paper

• Filament Drying Desiccant Usage Instructions

  Note: If you just received our desiccant, we recommend following the recharging instructions below before its first use for optimal performance. Gather the materials you will need: Filament Drying Desiccant A spool of filament that needs to be dried ...

• Mako™ Hotend for Bambu Lab Printing Tips

  To help you get the most out of your upgrade, we’ve put together some helpful resources and tips below. Installation & Setup Mako™ for Bambu Lab Upgrade Kit Installation Instructions Mako™ Hotend Clogging with Low-Temperature Filaments If you haven’t ...

• How to Install the Upgrade Kit for Creality Ender

  How to Install the Upgrade Kit for Creality Ender Overview The Upgrade Kit for Creality Ender is offered in two different versions. In both versions, Kit and Kit + Heater/Sensor, you will receive one pre-assembled Slice Engineering Copperhead Hotend. ...

• Heat Break Insulator

  The Mosquito® Magnum Hotend comes fitted with a custom composite ceramic heat break insulator. The insulation provided by this part extends the melt zone of the Mosquito® Magnum and increases print speeds. Unlike our metal components, the ceramic ...