What parts do I need to upgrade a Craftbot Plus Pro 3D printer with a Mosquito™ Hotend?
Related Articles
What parts do I need to upgrade a Prusa 3D printer with a Mosquito™ Hotend?
The Mosquito™ can work with the stock heater, thermistor, and fan that already come on your Prusa 3D printer. Therefore, to upgrade to a Mosquito™, all you would need is the hotend itself, some Boron Nitride thermal paste to properly seat the heater ...
Will I lose any functionality switching to a Mosquito™ Hotend?
Not at all! But you will gain functionality in the One-Handed Nozzle Change™ and the long-term durability of the Mosquito™ Hotend.
Craftbot Flow Upgrade Bundle Installation Instructions
Craftbot Flow Upgrade Bundle Installation Instructions What You Need -Craftbot Flow Upgrade Bundle - Copperhead™ Hotend - CB-Flow (x1) - Industrial Heater - 50W / 24V (x1) - Vanadium Nozzle™ - 0.4 mm (x1) - Nozzle Torque ...
Do I need a cooling fan with the Mosquito?
The Mosquito™ hotend can function without active cooling (a fan) under certain conditions, but it is advisable to use a fan when printing with PLA and other lower temperature plastics (PETG, ABS, etc). The cooling fan can be positioned on either side ...
Mosquito® vs. Mosquito® Magnum, which one should I get?
The Mosquito® Magnum has the same high temperature performance, small form factor, and light weight as the standard Mosquito® Hotend, but offers a much higher volumetric flow rate of melted plastic. If you routinely print with nozzle sizes of 0.6 mm ...