What is the maximum chamber temperature Mosquito Liquid can be used in?
250°C is the upper threshold of chamber temperatures that we have tested currently with Mosquito Liquid, it's possible to increase that with proper tuning of settings.
Adding Temperature Sensor Redundancy to Klipper
The Mosquito® Magnum+ hotend boasts the ability to use multiple temperature sensors for redundancy, which can also serve as a safety feature. In Klipper, the method to add in this feature requires a workaround that is simple to implement. Do not ...
Mosquito Magnum+® Dual Heater Configuration for RepRapFirmware 3.0+
The first method of configuring a dual heater Mosquito Magnum+® is using a single logical heater with two physical outputs. The second method involves using two heaters in parallel, acting as a single heater with double the power. The third ...
Do I need a cooling fan with the Mosquito?
The Mosquito™ hotend can function without active cooling (a fan) under certain conditions, but it is advisable to use a fan when printing with PLA and other lower temperature plastics (PETG, ABS, etc). The cooling fan can be positioned on either side ...
Mosquito® vs. Mosquito® Magnum, which one should I get?
The Mosquito® Magnum has the same high temperature performance, small form factor, and light weight as the standard Mosquito® Hotend, but offers a much higher volumetric flow rate of melted plastic. If you routinely print with nozzle sizes of 0.6 mm ...
Mosquito Magnum+® Assembly Instructions - 1.75 mm Liquid-Cooled and Conduction-Cooled