Mosquito® vs. Mosquito® Magnum, which one should I get?
The Mosquito® Magnum has the same high temperature performance, small form factor, and light weight as the standard Mosquito® Hotend, but offers a much higher volumetric flow rate of melted plastic. If you routinely print with nozzle sizes of 0.6 mm or greater, we highly recommend the Mosquito® Magnum for its higher flow rates. If you use nozzles smaller than 0.4 mm, the standard Mosquito® will suffice to meet or exceed all of your flow rate needs.
Related Articles
Will I lose any functionality switching to a Mosquito™ Hotend?
Not at all! But you will gain functionality in the One-Handed Nozzle Change™ and the long-term durability of the Mosquito™ Hotend.
Mosquito™ Magnum+ Dual Heater Configuration for RepRapFirmware 3.0+
The first method of configuring a dual heater Mosquito™ Magnum+ is using two heaters in parallel, acting as a single heater with double the power. The second configuration involves each heater being tied to its own extruder heater output and then ...
Should I get the Mosquito™ or the Copperhead™?
The Mosquito™ and the Copperhead™ share our Bimetallic Heat Break™ technology, are both designed for high performance applications, and are beautifully designed and machined in America; but the similarities end there. The Copperhead™ is a traditional ...
What is the mass of the Mosquito™ and the Mosquito™ Magnum?
The Mosquito™ Hotend weighs 41g, while the Mosquito™ Magnum weighs 45g, making the pair the lightest high-performance hotends available on the market
What are the max flow rates for the Mosquito™/Mosquito™ Magnum?
Volumetric flow rates are somewhat variable, depending on your 3D printer, filament material, nozzle size, extruder type, slicer settings, model being printed, etc. With optimized settings, the Mosquito™ can reach approximately 20-25 mm^3/sec, while ...