Mosquito® Silicone Boot Installation: A Quick Guide

Mosquito® Silicone Boot Installation Instructions


Mosquito® Silicone Boot Installation Instructions


What You Need

  1. Mosquito® Hotend
  2. Mosquito® Silicone Boot
  3. Nozzle

Before Starting

  1. Remove any plastic residue from the Mosquito® Hot Block.
  2. Install the nozzle of your choice following the Mosquito® Installation Guide.

Installation

Step 1: Starting from the back of the Mosquito® Hot Block, slide the Mosquito® Silicone Boot onto the Mosquito® Hot Block.

Step 2: Push the Mosquito® Silicone Boot the rest of the way onto the Mosquito® Hot Block.

Step 3: Make sure the upper flanges on the Mosquito® Silicone Boot are completely on top of the Mosquito® Hot Block.



    • Related Articles

    • Copperhead® Silicone Boot Installation Instructions

      Copperhead® Silicone Boot Installation Instructions What You Need Copperhead® Silicone Boot Copperhead® Hot Block Copperhead® Heat Break Nozzle Before Starting Remove any filament residue on the Copperhead® Hot Block. Attach the nozzle to the ...
    • Mosquito® Installation Instructions

      Mosquito® Installation Instructions Mosquito Performance Advantages Swap nozzles with ease in 10 seconds with the Slice Engineering™ Mosquito all-metal hotend. The patented Mosquito design resists the torque of nozzle changes; no longer must you ...
    • Prusa Mini Upgrade Kit Installation Instructions

      Prusa Mini Upgrade Kit Installation Instructions What You Need Prusa Mini Upgrade Kit - Copperhead® Copperhead Hot Block Copperhead Heat Break - P Mini Copperhead Silicone Boot GammaMaster® Nozzle - 0.4 mm Capricorn Premium PTFE Tube - 30.8 mm Boron ...
    • Mosquito® Conduct™ Installation Instructions

      How to Install the Mosquito® Conduct™ Before Proceeding please read the Mosquito® Magnum+™ and Conduct™ Hotends Health and Safety Warnings, Limited Warranty, Limitations of Warranty, and Disclaimer of Liability. It is assumed that you have read and ...
    • How to Install the Prusa i3 Mosquito® Upgrade Kit (MK3S+)

      How to Install the Prusa i3 Mosquito® Upgrade Kit (MK3S+) Overview The Prusa i3 Mosquito® Upgrade Kit (MK3S+) has all the necessary components to replace your stock i3 MK3S+ hotend with a new Slice Engineering® Mosquito hotend. This kit replaces not ...