Is there an adapter yet for my 3D printer?

• Related Articles

• What parts do I need to upgrade a Prusa 3D printer with a Mosquito™ Hotend?

  The Mosquito™ can work with the stock heater, thermistor, and fan that already come on your Prusa 3D printer. Therefore, to upgrade to a Mosquito™, all you would need is the hotend itself, some Boron Nitride thermal paste to properly seat the heater ...

• Copperhead™ Installation Instructions

  Copperhead™ Installation Instructions  Copperhead™  Performance Advantages Eliminate heat creep with the Slice Engineering® Copperhead™ all-metal hotend. The open source (CC-BY-SA 4.0) Copperhead™ design utilizes the Bimetallic Heat Break™ technology ...

• What parts do I need to upgrade a Craftbot Plus Pro 3D printer with a Mosquito™ Hotend?

  We recommend using the Mosquito™  with the stock heater, thermistor and fans that already come on your Craftbot 3D printer. Therefore, to upgrade to a Mosquito™, all you would need is the hotend itself, some Boron Nitride thermal paste to properly ...

• Will I lose any functionality switching to a Mosquito™ Hotend?

  Not at all! But you will gain functionality in the One-Handed Nozzle Change™ and the long-term durability of the Mosquito™ Hotend.

• Prusa Mini Upgrade Kit Installation Instructions

  Prusa Mini Upgrade Kit Installation Instructions What You Need Prusa Mini Upgrade Kit - Copperhead® Copperhead Hot Block Copperhead Heat Break - P Mini Copperhead Silicone Boot Bridgemaster® Nozzle - 0.4 mm  Capricorn Premium PTFE Tube Boron Nitride ...