How should Eisele Fittings be tightened on Mosquito® Liquid?
How should Eisele Fittings be tightened on Mosquito® Liquid?
If using Eisele Fittings, the compression side should be hand tightened and the threaded side should be torqued to a maximum of 9 Nm for a proper seal.
The best resource to find the tubing specifications for the Eisele Fittings we sell is through the Eisele website. Please use the part numbers below to search on Google and find the Eisele Connector PDF describing the tubing specification for the ...
250°C is the upper threshold of chamber temperatures that we have tested currently with Mosquito Liquid, it's possible to increase that with proper tuning of settings.
We tested our liquid-cooled hotends with Koolance's RPM-ALX400 (https://koolance.com/reservoir-pump-module-rpm-alx400), but it provides way more cooling than is necessary. The smallest pumps available for cooling computers, for example, provide an ...
The Mosquito® Magnum has the same high temperature performance, small form factor, and light weight as the standard Mosquito® Hotend, but offers a much higher volumetric flow rate of melted plastic. If you routinely print with nozzle sizes of 0.6 mm ...