Mosquito on Multi-Filament Setups Like Prusa 3D Printer MMU
Does the Mosquito® work with multi-filament setups like the Prusa MMU?
The Mosquito® works especially nicely with the multi-filament 3D Printersor color changing systems due to our short, high efficiency Bimetallic Heat Break™.
The Mosquito can work with the stock heater, thermistor, and fan that already come on your Prusa 3D printer. Therefore, to upgrade to a Mosquito, all you would need is the hotend itself, some Boron Nitride thermal paste to properly seat the heater ...
The Mosquito® hotend can function without active cooling (a fan) under certain conditions, but it is advisable to use a fan when printing with PLA and other lower temperature plastics (PETG, ABS, etc). The cooling fan can be positioned on either side ...