Does Boron Nitride Paste have any interaction with other metals?

• Related Articles

• How to Properly Use Boron Nitride Paste?

  We recommend Boron Nitride Paste for use in hotends of any brand to significantly improve heat transfer. For decades it has been used as a “heat transfer and release coating” for industrial cartridge heaters. Boron Nitride Paste can be used in many ...

• Where and when should thermal paste be used in the assembly and maintenance of the Mosquito™ or Copperhead™?

  We recommend Boron Nitride (BN) Paste for any hotend, at every interface where you want heat to flow. BN paste quickens the heat/sense feedback loop, improves the life of the cartridge heater (it's been used to seat cartridge heaters in molds for ...

• How do you clean off Boron Nitride Paste?

  Boron Nitride Paste is water-soluble and wiped off or otherwise removed with water.

• How do you secure the temperature sensor (thermistor) and the heater cartridge in the Mosquito™ Hot Block?

  Both are secured with Boron Nitride (BN) Paste. BN paste is required on the temperature sensor (thermistor) for accurate measurement. BN paste is also desirable on the heater cartridge and nozzle threads. The retaining screws on either end of the hot ...

• How to remove your heater/temperature sensor once the Boron Nitride Paste has dried?

  If you are reading this article, odds are that you are trying to remove your heater or temperature sensor from your hot block. If you add Boron Nitride Paste into the mix, you might feel like your components are permanently stuck in the hot block. ...