Popular Articles
How to Properly Use Boron Nitride Paste?
We recommend Boron Nitride Paste for use in hotends of any brand to significantly improve heat transfer. For decades it has been used as a “heat transfer and release coating” for industrial cartridge heaters. Boron Nitride Paste can be used in many ...
What are the max flow rates for the Mosquito®/Mosquito® Magnum?
Volumetric flow rates are somewhat variable, depending on your 3D printer, filament material, nozzle size, extruder type, slicer settings, model being printed, etc. With optimized settings, the Mosquito® can reach approximately 35 mm3/sec, while the ...
Filament Drying Desiccant Usage Instructions
Gather the materials you will need: the Filament Drying Desiccant canister a spool of filament that needs to be dried (spoiler alert, all spools need to be dried! Even many of the ones you just took out of the packaging) a storage container of some ...
How Do I Apply Plastic Repellent Paint™?
Plastic Repellent Paint™ is super easy to apply. The vial comes with a brush top applicator that is used to paint the nozzle or hot block. Open your vial of Plastic Repellent Paint™ Use the brush top applicator in the lid to brush or "paint" a clean ...
How do I update my firmware to be compatible with the Slice Engineering Thermistor?
300°C Thermistor The 300°C Thermistor works natively with Marlin, Duet/RepRapFirmware, and Klipper. Marlin If you are compiling Marlin for use with the 300 °C Thermistor, make sure to choose the "100K thermistor - ATC Semitec 104NT-4-R025H42G". This ...