Slice Engineering Community Forum | 3D Printer Upgrade Questions

Filament skipping
I am hoping someone can help point me in the right direction. I am running a Railcore II ZL with core xy setup using a Bondtech extruder and a Mosquito Magnum hotend. I am running a 0.4 mm Tungsten Carbide nozzle (love these nozzles by the way, better
Stringing with Prusa Mini w/ BondTech extruder and Copperhead hot end
I went all in with the upgrades for my Mini. I can print filaments now that I couldn't print before. The print quality is over the top. Mini has never printed this well before. However... I have bad stringing that that won't go away. The stringing is

Announcements
Welcome to Slice Engineering!
Welcome to the Slice Engineering Help Desk! If you have any questions, have a chat with us or submit a support ticket. Stay zesty!

Filament skipping